CNC Milling of an Aluminum Ejector Guide
(click on thumbnail to enlarge) 
Aluminum ejector guide after being CNC milled for an aerospace application
The component shown here is an ejector guide that was fabricated for an aerospace client. Composed of T6 aluminum, it was machined on our state of the art NH5000 4-axis horizontal CNC mill.
Machining included drilling, countersinking, profiling, milling slots, and deburring which utilized the mills 4th axis. The finished part measured 72mm in length, 50mm in width, and 32.8mm in height, and met tolerances of ± 0.0015". Finishing processes included drilling and PTFE anodizing. We manufacture and deliver 1000 of these components for our customer annually spread over several shipments, all with a lead time of 15 days.
For more on this custom CNC machining project, see the table below or contact us directly.
Highlights of this Custom CNC Machined Aluminum Project
| Product Description |
Ejector Guide |
| Custom CNC Milling Capabilities Applied/Processes |
Primary:
CNC Milling
- Drilling
- Countersinking
- Mill Profile
- Mill Slot
- Deburr Utilizing Machines 4th Axis
Secondary:
Drilling
PTFE Anodizing |
| Equipment Used to Manufacture Part |
NH5000 4-axis horizontal mill |
| Overall Part Dimensions |
Length: 72mm
Width: 50mm
Height: 32.8mm |
| Tightest Tolerances |
± 0.0015" |
| Material Used |
T6 Aluminum |
| Material Finish |
PTFE Anodized |
| Industry for Use |
Aerospace Industry |
| Volume |
1000 per year in Several Shipments |
| Delivery/Turnaround Time |
15 Days |
| Delivery Location |
Missouri |
| Standards Met |
Customer supplied print, 2D CAD Drawing |
| Product Name |
Raw Ejector Guide |
Back to top | 
Print This Page
